INDUSTRIAL COMPUTER SOURCE Industrial Partner

SB586T - Industrial Computer Source SB586T SBC - Socket 7 Intel Pentium...

larger image

Request Quote
For Price
Part Number:
SB586T
Model Number:
SB586T
Make:
INDUSTRIAL COMPUTER SOURCE
Lead Time:
Available
Qty In Stock:
Available

Industrial Computer Source SB586T SBC - Socket 7 Intel Pentium & AMD K6/K6-2 Support | Serial/Parallel Ports - With USB | VGA | SCSI and LAN Options Simple Type: CPU Board

The SB586T series of CPU boards are full featured, industrialized, single board computers supporting the Intel Pentium, Pentium with MMX technology, AMD K6, and AMD K6-2 processors. The boards feature an external bus architecture that complies with the ISA standard and includes a PCI bus extension to communicate with onboard functions. This extension supports the DEC PCIto-PCI bridge chip, allowing additional peripherals on the PCI bus. The SB586T series supports a full range of processors with speeds ranging from 100 to 300MHz. You may select models with or without MMX support or the similar 3DNow! technology. Each board has four 72-pin SIMM sockets, arranged in two banks and will accept up to 256MB of DRAM using 32-bit EDO or 36-bit FPM SIMMs. ECC memory is also supported. In addition, a 512K onboard synchronous pipeline burst cache is standard on all models. For more information, please view the attached datasheet.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • BIOS: AMI
  • Cache: 512KB
  • Chip Set: Intel
  • Dimensions: Unidentified
  • I/O Options: Floppy drive interface, IDE interfaces (2), SCSI interface, parallel port, PS/2 mouse port, serial ports (2), VGA feature connector, VGA port, IPC connector, Ultra SCSI interface
  • Maximum Onboard Memory: 256MB (EDO supported)
  • Maximum Video Memory: 1MB
  • Processor Speed: 100/133/166/200/233MHz
  • Processor: Pentium

Specifications

    General
  • Agency Approvals: FCC conformity with: 47 CFR Part 15, Subpart B, Class A; CE conformity with: EU EMC Directive 89/336/EEC, EU Low Voltage Directive 72/23/EEC; UL/cUL Recognized to Ul 1950, 2nd Ed: 1993, cUL/CAN/CSA-C22.2 No. 950.93
  • BIOS: Hi-Flex Pentium AMIBIOS, Flash EPROM support, Plug-and-Play compatible; Full support for Year 2000 and leap-year date functions
  • Cache Memory: 16K internal Pentium chip cache (32K on MMX); 512K synchronous pipeline burst L2 cache onboard
  • Chip Set: Triton II (Intel 430HX)
  • CMOS Battery: Onboard, included in Dallas 12887A chip (U18 in Figures 2-1 through 2-6)
  • Crystal Clock Rate: 14.31818MHz ±100ppm
  • Diskette Controller: 2 diskette drives, up to 2.88MB supported
  • EIDE Disk Controller: Four fixed disk drives supported (two each on primary and secondary PCI buses); LBA and PIO Mode 4 support
  • Ethernet Controller: SB586TT: Complies with IEEE 802.3 and ANSI 8802-3 Ethernet standards; 10/100 BASE-T twisted-pair cable with full-duplex operationl; RJ45 connector included; DEC 21140-AE controller
  • ISA Bus Clock Rate: 8.33MHz, 24mA line drivers
  • Memory Capacity: 256MB maximum onboard
  • Memory Speed Required: 70ns or faster
  • MTBF: >90,000 P.O.H. @ 25°C
  • Operating Temperature: 0°C to 70°C
  • OperatingHumidity: 5% to 90% RHNC
  • Parallel Port: One, Centronics-compatible, bidirectional compatibility; EPP and ECP enhanced port modes
  • PCI Bus Clock Rate: 33MHz
  • Power Requirements: 1.6A @ +5V, <100mA @ +12V
  • Processor: Intel Pentium
  • Processor Clock Rate: 100, 133, 166, 200, 233, 266, or 300MHz
  • Processors Supported: Intel Pentium, AMD K-6, or AMD K6-2 in a ZIF Socket 7
  • SCSI Disk Controller: SB586TS and SB586TS2V: SCSI-3 Ultra-Wide controller, located on PCI local bus; Autosensed 8-bit or 16-bit bus; To 40MB/sec throughput; Adaptec AIC-7880 single-chip host adapter
  • Serial Ports: Two, RS232, 16550-compatible, FIFO buffer; Isolated to ±1500V ESD; MAX211E component incorporated for enhanced ESD protection
  • SIMM Support: 2 banks, 2 sockets each, 72-pin, 32-bit EDO or 36-bit FPM (with parity) SIMMs; ECC memory supported
  • Speaker, Keyboard, Keylock, and Reset Port: Single 8-pin header connector for system interface
  • Storage Humidity: 5% to 90% RHNC
  • Storage Temperature: -40°C to 85°C
  • Supported Operating Systems: Windows NT V4.0 Workstation and Server, Windows '95 OSR2, SCO Unix V5.0 and later, SCO UnixWare V2.1 and later, Solaris V2.5.1 with driver update patches 9 and 10, MS-DOS 6.22, Windows 3.11, OS/2 V2.0 and later, QNX 4.24
  • Video Controller: SB586T2V, SB586TS2V, and SB586TT:SVGA Video, Cirrus Logic CL-GD5446; 2MB DRAM installed; VESA feature connector; Rear panel DB-15, high density, 15-pin connector, female
  • Watchdog Timer: Reset CPU automatically if CPU stops operating; Reset CPU automatically if +5VDC varies more than 5%

 

Applications

  • None Available

Aliases

  • None Available